Thanx for reply,with TS7400 dont have ts9441 baord,still can we boot form SD
card.If yes just elaborate little more.
---------------------------------------------------------------
--- In "Breton M. Saunders" <>
wrote:
>
> ts7300 wrote:
> > Hi,
> > I am using TS7400 module by default it is using TS- FLASHBOOT bootup
> > firmware residing in ROM memory. But can we boot from an SD Card, through
> > the TS-SDBOOT firmware.
> > Can somebody suggest me something upon this....
> >
> >
> Yes - the ts-sdboot software will do that; check TS's website. You will
> want to have a ts9441 board, and/or a spi-flash emulator prior to
> changing the startup software on the ts7400.
>
> If you are running 2.6.21 (or whatever TS is using) you may be able to
> statically link the SD card driver into the kernel. This allows you to
> boot directly to modern ext2 filesystem running on the SD card; thus
> avoiding the difficulties associated with NAND flash filesystems. You
> can also get rid of the initialfs ram disk.
>
> The advantage of such a setup is that you can develop on your PC, put
> the SD card into a USB sdcard reader/writer, and directly modify the
> filesystem / kernel partition using DD / ext2, etc...
>
> Cheers,
>
> -Brett
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|