[ts-7000] UART question...important

To:
Subject:	[ts-7000] UART question...important
From:	"nancyhead86" <>
Date:	Sat, 23 May 2009 22:03:12 -0000

hi, everyone 
I have a very important question about the The TS-7250  Single Board Computers 
the one that has the TS-Linux Embedded Operating System Installed and the 
Cirrus EP9302 ARM9 CPU. The question is How can i configure, write and receive 
in the UARt throught the COM1 and Com2 of the TS-7250?
It is very important to know this info because right now i'm working in my 
Tesis and really need this info. 
thx
Ing. Nancy Cabeza 
 



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] UART question...important, nancyhead86 <= [ts-7000] Re: UART question...important, naturalwatt

Previous by Date:	[ts-7000] Re: Running Apache on a 7400 from onboard flash?, bburtan65
Next by Date:	[ts-7000] Re: new incoming TS-7500, janne.kario
Previous by Thread:	[ts-7000] compile kernel, mahmoud
Next by Thread:	[ts-7000] Re: UART question...important, naturalwatt
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU