[ts-7000] ts-adc16 and ts 7250 interrupt problem

["beetle.chus" <>]

Hi,
i have developed a kernel driver for the ts-adc16 using some code already 
existing as a starting point. The driver is mostly working (start/stop/read) 
except for interrupt handling. With the ts-adc16 jumper JP4 being OFF, IRQ6 is 
selected. This IRQ, as stated in the manual, is conected to IRQ33 on EP93X cpu. 
If I enable the INTEN bit on the ADCSTAT register in the ts-adc 16 board, the 
whole systems hangs without giving any information. Someone have some idea 
about this problem?. My idea is to share the code in this list once it is 
finisned so everyone can use it.

thanks in advance,
Pablo



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/