I have the exact same problem!
Can anyone help?
many thanks,
Magda
--- In michael mitzelburg <>
wrote:
>
> Dear Jason,
>
>
> This time, I tried to use a USB. Below are part of the bootup log file, I
> also attach a complete log :
>
>
> Thank you
>
> >> TS-7200: Rev E0 CPU,
> Using buffer write methodct: DataTraveler 2.0
> ep93xx-ohci ep93xx-ohci: irq 56, io mem 0x80020000t> fis load vmlinuxer: 0,
> 409
> NET: Registered prot
> usb usb1: Product: EP93xx OHCI8 2005
> RedB
> ieee80211: 8
> usb usb1: Manufacturer: Linux 2.6.21-ts ohci_hcdes)at, Inc.168.0.10
> /~me/zImage-72xx-2
> Can't
> usb usb1: SerialNumber: ep93xx(C) 2004-2005 Intel Corporatio
> usb usb1: configuration #1 chosen from 1 choice218000 -m http -h 192.168.0.10
> /~test/zImage-
> hub 1-0:1.0: USB hub found-m48t86: setting the syste
> hub 1-0:1.0: 3 ports detected (12362481tsno regis
> usb 1-3: configuration #1 chosen from 1 choice
> scsi0 : SCSI emulation for USB Mass Storage devices
> usbcore: registered new interface driver usb-storage
> USB Mass Storage support registered.
> usbcore: registered new interface driver usbhid
> drivers/usb/input/hid-core.c: v2.6:USB HID core driver
> mice: PS/2 mouse device common for all mice
> rtc-m48t86 rtc-m48t86: rtc core: registered m48t86 as rtc0
> rtc-m48t86 rtc-m48t86: battery ok
> ep93xx-rtc ep93xx-rtc: rtc core: registered ep93xx as rtc1
> TCP cubic registered
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> NET: Registered protocol family 15
> ieee80211: 802.11 data/management/control stack, git-1.1.13
> ieee80211: Copyright (C) 2004-2005 Intel Corporation <>
> rtc-m48t86 rtc-m48t86: setting the system clock to 2009-03-05 10:22:15
> (12362485
> 35)
> Root-NFS: No NFS server available, giving up.
> VFS: Unable to mount root fs via NFS, trying floppy.
> VFS: Cannot open root device "usb0" or unknown-block(2,0)
> Please append a correct "root=" boot option
> Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(2,0)
>
>
>
>
>
>
> ________________________________
> From: Jason Stahls <>
> To:
> Sent: Friday, March 6, 2009 11:45:06 PM
> Subject: Re: [ts-7000] Steps of installing debian sarge in ts-7200?
>
>
> Please paste the complete output of the bootup so we can have a better
> idea of where it's going wrong.
>
> Jason Stahls
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|