ts-7000
[Top] [All Lists]

[ts-7000] Re: ts-7260 & redboot - save fis directory?

To:
Subject: [ts-7000] Re: ts-7260 & redboot - save fis directory?
From: "thinkr32" <>
Date: Tue, 19 May 2009 16:23:38 -0000
--- In  "j.chitte" <> wrote:
>
> --- In  "thinkr32" <cmosis5@> wrote:
> >
> > I'm trying to copy the FIS config directory so that I can restore it when 
> > needed. However, it doesn't seem to work.
> > 
> > It seems like I need to copy it to RAM, then from RAM I can copy that 
> > elsewhere. (You can't dump the fis directory via dump or x cmds).
> > 
> > (Trying to copy to RAM)
> > RedBoot> fis load -b %{FREEMEMLO} "FIS directory"
> > RedBoot> x -b %{FREEMEMLO}
> > 00051800: E1A00000 E1A00000 E1A00000 E1A00000
> > 00051810: E1A00000 E1A00000 E1A00000 E1A00000
> > 
> > However, this doesn't seem to be working, since nothing is going in that 
> > mem locaiton. 
> > 
> > (just filled memory with 5555)
> > RedBoot> x -b %{FREEMEMLO}
> > 00051800: 00005555 00005555 E1A00000 E1A00000
> > 00051810: E1A00000 E1A00000 E1A00000 E1A00000
> > RedBoot> fis load -b %{FREEMEMLO} "FIS directory"
> > RedBoot> x -b %{FREEMEMLO}
> > 00051800: 00005555 00005555 E1A00000 E1A00000
> > 00051810: E1A00000 E1A00000 E1A00000 E1A00000
> > RedBoot>
> > 
> > 
> > 
> > 
> > 
> > 
> > 
> > RedBoot> version
> > 
> > RedBoot(tm) bootstrap and debug environment [ROMRAM]
> > Non-certified release, version current-TS_5 - built 16:49:31, Mar  1 2005
> > 
> > Platform: TS-7250 Board (ARM920T) Rev A
> > Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
> > 
> > RAM: 0x00000000-0x02000000, [0x00051570-0x01ff9000] available
> > FLASH: 0x60000000 - 0x62000000, 2048 blocks of 0x00004000 bytes each.
> >
> 
> my reading of the doc: 
> http://ecos.sourceware.org/docs-latest/redboot/fis-load-command.html 
> http://ecos.sourceware.org/docs-latest/redboot/fis-list-command.html
> indicates that you are trying to load the file  "FIS directory" from the FIS 
> directory. 
> 
> 'fis list' will show you the size of the blocks allocated to the fis 
> directory 
> 'fis list -d' will show you it's size. 
> 
> from your results I would guess it's size = 0
>


No, its size is 0x4000






------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU