RE: [ts-7000] FCC and the 7400

[Jayne Dickinson <>]

Greetings,

 

We are also interested in what changes to the 7400 board needs in order to pass FCC tests.

Any information would be greatly appreciated.

 

Thanks

Jayne

 

 

From: [ On Behalf Of Samuel M. Smith
Sent: Wednesday, May 06, 2009 5:07 PM
To:
Cc: Samuel M. Smith
Subject: Re: [ts-7000] FCC and the 7400

 

>
>
> We finally got our 7400 board based product approved by the FCC.
>

Was this Class A or Class B

>
> If any of you are having problems, here was our solution:
> 1. Remove the SD carriage.
>

This means you can't use SDCards?
>
> 2. Re-Shield the side of the board away from the ethernet connector.
>
Not sure that this entails
>
> 3. Ground the ethernet shield.
>

Do you have to fly wire it?
>
>
>
>

**********************************************************************
Samuel M. Smith Ph.D.
767 East 750 North, American Fork Utah 84003-1584 USA
801-768-2768 voice
801-768-2769 fax

**********************************************************************
"The greatest source of failure and unhappiness in the world is
giving up what we want most for what we want at the moment"
**********************************************************************

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___