>
>
> We finally got our 7400 board based product approved by the FCC.
>
Was this Class A or Class B
>
> If any of you are having problems, here was our solution:
> 1. Remove the SD carriage.
>
This means you can't use SDCards?
>
> 2. Re-Shield the side of the board away from the ethernet connector.
>
Not sure that this entails
>
> 3. Ground the ethernet shield.
>
Do you have to fly wire it?
>
>
>
>
**********************************************************************
Samuel M. Smith Ph.D.
767 East 750 North, American Fork Utah 84003-1584 USA
801-768-2768 voice
801-768-2769 fax
**********************************************************************
"The greatest source of failure and unhappiness in the world is
giving up what we want most for what we want at the moment"
**********************************************************************
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|