Hi Bob,
Other than moderating the group, I haven't had much chance recently to read
many of the posts - too busy working on my 7390 application...
Good to hear you managed to get the splash screen working, I don't know why it
wouldn't work with dither enabled - I can't remember what I did when I changed
the splash screen for my 7300 system.
I only use a small splash banner, maybe the issue is regarding the size of the
resulting splash screen - as dithering may significanlty increase the file size.
Regards,
PJE
--- In "hodge_bob" <> wrote:
>
>
> I've solved the issue. I removed the line from the MakeImages.c file that
> dithers the image, and everything worked. I hope someone else finds this
> useful.
>
> Thanks for providing the code, Peter. It got me on the right track.
>
> Bob
>
>
>
> --- In "hodge_bob" <hodge_bob@> wrote:
> >
> >
> > I'm using a TS-7390 and used the "MakeImage" code from this thread to make
> > my own logo screen. I have it looking good after icewm starts up, but it
> > looks horriby wrong when I replace the "splash.gz" that is used by the
> > fastboot startup.
> >
> > I was hoping someone else had seen this and could give advice. I assume
> > the framebuffer's display mode changes when icewm starts. If I could either
> > figure out how to mimic that change earlier, or get the correct geometry
> > for replacing Technologic's splash.gz, that would be great.
> >
> > Bob
> >
> >
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|