[ts-7000] Re: ADC24 C source code?

["charliem_1216" <>]

--- In  "bburtan" <> wrote:
>
> Do you happen to know what the input impedance is?
>

No, there's no single spec for that on the data sheet, but there are some 
curves showing %THD vs frequency for various levels of *output* impedance of 
the source.  Take a look at the datasheet ...

"When no amplifier is used to drive the analog input, the source
impedance should be limited to low values. The maximum source
impedance depends on the amount of THD that can be toler-
ated."


regards, ......... Charlie



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/