[ts-7000] ts 7800 kernel command line

To:
Subject:	[ts-7000] ts 7800 kernel command line
From:	"pattykirsch" <>
Date:	Wed, 29 Apr 2009 15:41:37 -0000

So I'm trying to mount a usb device at boot, and having problems... I found 
this post:
http://tech.groups.yahoo.com/group/ts-7000/message/13921
about adding to the kernel command line.... but I can't find where the kernel 
command line is to edit it.  Where is it?  Thanks.

Patty Kirsch



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] ts 7800 kernel command line, pattykirsch <= Re: [ts-7000] ts 7800 kernel command line, Theodore A. Roth

Previous by Date:	[ts-7000] File area spamming, Fred
Next by Date:	Re: [ts-7000] Re: Segmentation fault, Ali Koksal
Previous by Thread:	[ts-7000] File area spamming, Fred
Next by Thread:	Re: [ts-7000] ts 7800 kernel command line, Theodore A. Roth
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU