| To: | |
|---|---|
| Subject: | Re: [ts-7000] steppers motors control with TS 7200 |
| From: | Matthieu Crapet <> |
| Date: | Tue, 28 Apr 2009 21:02:57 +0200 |
What about designing a PC/104 peripheral for steppers motors.
Would be nice to play with ! I can develop the kernel driver :-)
m
ejeffredo wrote:
>
>
> Hi all,
>
> For my remote telescop I need to control 2 steppers motors. I would
> like to knows if it is possible with a TS 7200. I need different
> speed, can I use the ts 7200 's clock, how change the value, on which
> output ?
>
> Thanks
>
> Manu
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [ts-7000] Here where i stop again, Jason Stahls |
|---|---|
| Next by Date: | Re: [ts-7000] Re: kernel 2.6.28.3 for TS-72XX [take2], Matthieu Crapet |
| Previous by Thread: | [ts-7000] Re: steppers motors control with TS 7200, j.chitte |
| Next by Thread: | Re: [ts-7000] steppers motors control with TS 7200, Steve Weigold |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU