--- In "ejeffredo" <> wrote:
>
> Hi all,
>
> For my remote telescop I need to control 2 steppers motors. I would like to
> knows if it is possible with a TS 7200. I need different speed, can I use the
> ts 7200 's clock, how change the value, on which output ?
>
> Thanks
>
> Manu
>
Your question suggests you know little about what you need to do expect for the
fact you want to use stepper motors.
I suggest you read up on stepper motors and thier drive requirements. Do you
have any motors available or is this just an idea?
You should look elsewhere for your hardware requirements and then you will
probably be able to answer much of your own question or at least
have an idea what you need the 7200 to do.
read the TS doc on how to change outputs and look in the "files" on the left
here you will probably find some useful code examples on IO.
you will probably want to use an off the shelf stepper motor driver. Depending
on what you choose you will have different requirements of the SBC.
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|