Re: [ts-7000] Re: Compiling TS7250 Kernel Module

[Ali Koksal <>]

Hi, 

You need to use the right toolchain,

Which is ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7260-linux/cross-toolchains/crosstool-linux-gcc-3.3-glibc-2.2.5.tar.bz2 in this case.

Best regards,
Ali Koksal

On Mon, Apr 27, 2009 at 9:24 AM, beetle.chus <> wrote:

Hi!,
i have exactly the same problem while compiling the 2.4.26-ts11 downloaded from embeddedarm.com. Any news in how to avoid the
-mapcs-32" command line option. Searching in internet it seems it is an old gcc option for ARM architectures that it is being deprecated.

Pablo

--- In ts-7000%40yahoogroups.com, "charliem_1216" <> wrote:
>
> --- In ts-7000%40yahoogroups.com, "bene_gesserit_43" <manufernandez43@> wrote:
> >
> > Hi!
> >
> > I have exactly the same problem, and I havent found a solution. Does anybody know any tip to avoid this error?
> >
> > Thanks in advance
> >
> > --- In ts-7000%40yahoogroups.com, "pgavigan@" <pgavigan@> wrote:
> > >
> > > Hello,
> > >
> > > I've been trying to compile a Kernel Module for the ARM 7250 without success. My goal is to install the module onto a system using the insmod command. I've been told by a technical support rep at Embedded ARM that to do this I have to compile the module (a one file program) against a compiled version of the kernel.
> > >
> > > Here's a summary of the problem:
> > >
> > > 1) I have installed the cross compiler (using instructions found at http://www.kegel.com/crosstool/crosstool-0.43/doc/crosstool-howto.html#quick). I've attempted several versions of gcc, however most recently I trying with version gcc-4.1.0-glibc-2.3.2.
>
> Download & use the exact TS toolchain that was used to build the kernel. This is especially important if you are trying to build only a module to fit into an existing kernel.
>
> regards ....... Charlie
>
> > >
> > > 2) I have downloaded and unpacked the linux distribution installed on my target. Specifically, 2.4.26-ts9 from embeddedarm.com. I have set the path to the cross compiler in the top level makefile in the kernel files, as well as the name of the cross compiler.
> > >
> > > 3) I have run the "make ts7250_config" and "make oldconfig" scripts.
> > >
> > > 3) The "make dep" script fails with the following error: "error: unrecognized command line option "-mapcs-32""
> > >
> > > I have not been able to determine what the -mapcs-32 setting is or where it is set in the kernel. As a result, I am not sure where the problem is. Also, is there a faster/ less complicated way to compile a kernel module?
> > >
> > > Thanks in advance for any assistance.
> > >
> > > Patrick
> > >
> >
>

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___