Hi!
I have exactly the same problem, and I havent found a solution. Does anybody
know any tip to avoid this error?
Thanks in advance
--- In "" <> wrote:
>
> Hello,
>
> I've been trying to compile a Kernel Module for the ARM 7250 without success.
> My goal is to install the module onto a system using the insmod command.
> I've been told by a technical support rep at Embedded ARM that to do this I
> have to compile the module (a one file program) against a compiled version of
> the kernel.
>
> Here's a summary of the problem:
>
> 1) I have installed the cross compiler (using instructions found at
> http://www.kegel.com/crosstool/crosstool-0.43/doc/crosstool-howto.html#quick).
> I've attempted several versions of gcc, however most recently I trying with
> version gcc-4.1.0-glibc-2.3.2.
>
> 2) I have downloaded and unpacked the linux distribution installed on my
> target. Specifically, 2.4.26-ts9 from embeddedarm.com. I have set the path
> to the cross compiler in the top level makefile in the kernel files, as well
> as the name of the cross compiler.
>
> 3) I have run the "make ts7250_config" and "make oldconfig" scripts.
>
> 3) The "make dep" script fails with the following error: "error: unrecognized
> command line option "-mapcs-32""
>
> I have not been able to determine what the -mapcs-32 setting is or where it
> is set in the kernel. As a result, I am not sure where the problem is.
> Also, is there a faster/ less complicated way to compile a kernel module?
>
> Thanks in advance for any assistance.
>
> Patrick
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|