[ts-7000] Using EmbeddedARm Kernel Module with 2.6.x User Dev Kernel

["wildpossumboy" <>]

Hi All.

I need to build the latest 2.6 kernel because of particular needs; BUT I also 
require the 6 of the 10 (fpga coded) UARTs that EmbeddedARM.com TS-7800 board 
provides.

My question: 

If I reconfigure & build a newer 2.6.x kernel release (not the ts-kernel), will 
copying the EmbeddedARM supplied kernel modules to the correct 
/lib/2.6.x/modules tree and, simply issuing a "modprobe ts..." get them to load 
and work correctly?

Or are there "gotch ya" that one must be aware off.

Module                  Size  Used by 
tsuart7800              2716  0 
tsuart1                13964  5 tsuart7800
tssdcard               32192  0  
ts7800                  3600  2 

Has anyone actual done this?

Thanks & Cheers.
Grahame



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/