Hi David,
Thank you for the invaluable information.
At some time in the near future I'm going to be getting a TS-TPC-7390 EMC/FCC
tested - as part of a complete servo control system. I managed to get my old
system through reasonably easily, but the monitoring system in that design had
a 128x128 monochrome LCD and a 20MHz CPU...
Regards,
PJE
--- In "David L. Martin" <> wrote:
>
> We finally got our 7400 board based product approved by the FCC.
> If any of you are having problems, here was our solution:
> 1. Remove the SD carriage.
> 2. Re-Shield the side of the board away from the ethernet connector.
> 3. Ground the ethernet shield.
>
> In addition we always remove the power connector, don't know if that had
> any effect.
>
>
> --
> David L. Martin
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|