[ts-7000] FCC and the 7400

To:
Subject:	[ts-7000] FCC and the 7400
From:	"David L. Martin" <>
Date:	Sat, 11 Apr 2009 12:51:54 -0400

We finally got our 7400 board based product approved by the FCC.
If any of you are having problems, here was our solution:
1. Remove the SD carriage.
2. Re-Shield the side of the board away from the ethernet connector.
3. Ground the ethernet shield.

In addition we always remove the power connector, don't know if that had 
  any effect.


-- 
David L. Martin



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] FCC and the 7400, David L. Martin <= [ts-7000] Re: FCC and the 7400, PeterElliot

Previous by Date:	Re: [ts-7000] TS7370 How to get TTL serial port working ?, Jason Stahls
Next by Date:	[ts-7000] Re: FCC and the 7400, PeterElliot
Previous by Thread:	[ts-7000] slram kernel module required pls..., wildpossumboy
Next by Thread:	[ts-7000] Re: FCC and the 7400, PeterElliot
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU