Breton M. Saunders napsal(a):
>
>
> Tobias McNulty wrote:
> > Breton M. Saunders wrote:
> >
> >> If not, your likely to run into a problem where 2.6.28 will mark a
> large
> >> number of blocks as bad due to a difference in the oob layout between
> >> the TS kernel and the one you're using.
> >>
> >
> > Is this reversible, or have I corrupted the flash if I tried to mount it
> > in 2.6 and then moved back to 2.4 (I think I'm going to stick with 2.4).
> >
> yes - but it is a pain in the ass.
> You need to turn off the oob checking in the kernel, recompile and then
> clear the nand flash using eraseall.
But I mean than many people need switch to 2.6.x for TS-74||2xx because 2.6
kernel have much better support for eg.
Bluetooh, USB, networking. Many software tools eg. Buildroot now doesn't
support 2.4x kernel anymore. 2.6 kernel work on
TS product very well.After I get working 2.6.x on all TS hw which I use I don't
need 2.4.x anymore.
Regards
Dan
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|