[ts-7000] TS-7390 - How to emulate a parallel port function?

["happy_plattler" <>]

Hi everyone,

As these TS computers do not have a parallel port I am looking for a way to use 
something on the system (probably the DIO header) to do a similar function. All 
I use the LPT on my other systems is to activate and deactivate one of the DATA 
bits. With the low voltage (around 3V) that this enables me to switch a relay 
on and off.

Now how would I do this with the TS-7390? I am guessing that this could be 
accomplished with the 24-pin Header (page 4 of the schematics) where I see some 
OUT pins.

Which pins could I use for that and via which device would I control them?

Any ideas or help would be greatly appreciated.

Thank you,

Ole



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/