[ts-7000] IOGEAR Probleme

To:
Subject:	[ts-7000] IOGEAR Probleme
From:	"ts7300" <>
Date:	Thu, 19 Mar 2009 13:12:38 -0000

Hi,
   I have configured TS7300 as acees point using USB dongle.Problem I am 
getting is that when wifi is up every times USB dongle hang the board.Every 
time either I have to plug it out from USB Port or reboot the system.Can 
somebody help me out from this why USB dongle hang the board when wifi is up.



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] IOGEAR Probleme, ts7300 <=

Previous by Date:	[ts-7000] Re: no /dev/ttyTS0 after insmod tsuart-rf on TS-7800, hajeezone3
Next by Date:	Re: [ts-7000] Re: no /dev/ttyTS0 after insmod tsuart-rf on TS-7800, Michael Schmidt
Previous by Thread:	[ts-7000] QT for Cygwin, alanbarton69
Next by Thread:	[ts-7000] Access samba server from TS-7260, alexanchoragealaska
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU