Jason Stahls wrote:
> <snip>
>
> I would say that your card reader is probably handling the LUNs on it's
> own and not exposing them if they don't have a card inserted into them.
> Try adding a SD card as well and see if it shows two devices then.
> Also, it's possible that the card reader is only capable of utilizing a
> single card at a time and shares pins between them, detecting which card
> is inserted via switches (I have such a card slot here.)
Another way of seeing the device you just inserted (such as a USB
device) is to run 'dmesg' it will show you the kernel log, and as such,
kernel module outputs.
--
Jason Stahls
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|