[ts-7000] Zmodem

To:
Subject:	[ts-7000] Zmodem
From:	"fredolamainfroide" <>
Date:	Tue, 03 Mar 2009 16:06:47 -0000

Hello,
I am using a TS7370 board
I need to use zmodem protocol between the board and a host.
'lrz' command is not found, is there an other command ?
Do I have to install a package ?

Fred



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] Zmodem, fredolamainfroide <=

Previous by Date:	Re: [ts-7000] Serial port mapping on TS7370, Michael Schmidt
Next by Date:	Re: [ts-7000] Ts-7300 wifi access point, Jim Jackson
Previous by Thread:	[ts-7000] Serial port mapping on TS7370, fredolamainfroide
Next by Thread:	[ts-7000] Re: DHCP Problem on TS-7800 Ethernet Port, jame1002004
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU