[ts-7000] 2.6 kernel on TS-7400

To:
Subject:	[ts-7000] 2.6 kernel on TS-7400
From:	"K" <>
Date:	Wed, 18 Feb 2009 02:47:12 -0000

Hello All,

I wish to compile the full Debian distribution (with 2.6 kernel)
myself and put the resulting bZimage file on the SD card. In the TS
documents it is only explained how make partitions and mount the file
system. The standard method for placing the 2.4 kernel based
distribution is to load the .dd image file onto the SD card by using
'dd' utility. What's the best way to accomplish this task? Can I build
proper dd image myself?


Thanks,
Kailash



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] 2.6 kernel on TS-7400, K <=

Previous by Date:	[ts-7000] Re: kernel 2.6 on TS7300, K
Next by Date:	Re: [ts-7000] 7800 USB mount problems, Catalin Ionescu
Previous by Thread:	[ts-7000] Re: kernel 2.6 on TS7300, K
Next by Thread:	[ts-7000] USB HID Device with the 7200, bonjelo2000
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU