I also want accomplish same thing. Did you figure out anything?
Thanks
--- In "Adriano Naspolini" <>
wrote:
>
> Hi,
> I need some help with compiling/installing the kernel 2.6 on TS-7300
> sd-card. I decided to do it because of JFS (i have some problems with
> power off without shudown), touch driver (I saw it inside the kernel
> modules) and wi-fi (it's instable).
>
> I already downloaded sources from ftp
>
(ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7300-linux/sources/tskernel-2.6.21-ts-src.tar.gz)
> and compiled using crosstool-linux26-3.4.4-2005q3-2, also from ftp
> (maybe http). The SD-Card module didn't work, but i found it also in
> ftp
>
(ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7300-linux/binaries/ts-modules/tskernelmodules-2.6.21-ts.tar.gz).
>
> Now I have the image inside /arch/arm/boot directory, and i read in
> oz.embeddedarm.com/~michael I need to make a dd if=zImage of=/dev/sdb1
> bs=65536 to put it in the SD.
>
> But I also want to know what i need to do to generate an adequate
> initrd and to put it in partition2 of SD.
>
> I think the files of partition 3 i can simply uncompress and paste
> there, is it correct?
>
> Is there anyone who already did it? I saw some messages talking about
> that, but there is no "tutorial" for dummies.
>
> Thanks
>
> Adriano
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|