Re: [ts-7000] TS7800 Changing SD card boot order?

[Frank <>]

When you're in busybox, type 'tshelp'.  It will list what to link to make the board boot from the SD card. 

ln -sf /linuxrc-sdroot /linuxrc; save

Make sure the 'tssdcard' referenced in linuxrc-sdroot is /dev/tssdcardb4.  That will boot from the SD card.  Change the 'b' to an 'a' to boot from the microSD card.

You should then be set.

-Frank
(right up I-95 in Holland, Bucks County)




Tom Panzarella wrote:

I'm working with the TS7800 and would like to use both the SD card and
microSD card. I would like to boot from the main SD card and have the
microSD card available for our application specific data storage, etc.
When I have both pieces of media installed in the 7800 the board hangs
while trying to boot from the microSD and doesn't seem to try the SD.
I looked in /linuxrc-fastboot to see if a change to this script could
make a difference but it wasn't clear that I could change this
behavior from that script.

Is it possible for me to configure the 7800 the way I would like? If
so, what is the mechanism for doing so?

Thanks in advance for any help.

-Tom.

--
Tom Panzarella
Chief Technology Officer
Freedom Sciences, LLC
The Navy Yard - Quarters M2
4601 South Broad Street
Philadelphia, PA 19112

office: 215.467.4270
mobile: 215.341.1754
tpanzarella@freedomsciences.com
http://www.freedomsciences.com

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___