Hi Matthew,
Not sure what your electronics capabilities are, but these
(http://www.maxim-ic.com/quick_view2.cfm/qv_pk/1426) can be easily
adapted to your purpose for ~$20.
-Terrance
--- In Matthew Harrell
<> wrote:
>
> Hi. I was hoping I might get some recommendations on a PC/104 ADC board
> that people have used with the TS series (I use a 7260). I need to
measure
> fast 1ms long noise pulses and realize there are a number of ADCs
out there.
>
> General requirements
> need to be able to capture 3 or 4 simultaneous readings
> 12 bit resolution or more would be nice
> want to take readings from the ADC about every 10 microseconds
> would prefer an interrupt based system over polling
>
> I'm leaning towards something like the TS-ADC24 but wanted to hear what
> others may have learned
>
> Thanks
>
> --
> Matthew Harrell
> Bit Twiddlers, Inc.
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|