[ts-7000] Problems porting new kernel 2.4 in ts7400

["tmoraes10" <>]

I'm a new developer in TS-7400 and i have troubles...

I was recompiling a new kernel 2.4 with V4L Support, but I didn't find
anythig about setting the memory addres of my vmlinux.bin, so I
coppeied a new vmlinux.bin to SD Card, and mounted in my old kernel
2.4. I don't know why, but I mounted my vmlinux.bin in /dev/mtdblock,
and when i rebooted i had kernel panic.

I booted with ts-9441 with boot jumper like the manual tells, and I
did the procedure like manual to recover the system. 

$ln -sf /linuxrc-mtdroot /linuxrc; save
$save
$exit

And I have my old linux in my board.
But When i remove jumper of ts9441, i have the fastboot 1.1s, and when
i write 'exit' command, I have this erros message:

>> Booting Linux (using onboard flash)...
pivot_root: pivot_root: No such file or directory
/linuxrc: 47: ./bin/mount: not found
/linuxrc: 48: ./bin/mount: nKernel panic: Attempted to kill init!
ot found
/l inuxrc: 49: cannot open ./dev/ttyAM0: No such file


So anybody could help me, to recover my system, or better, anybody
could help me to port my new kernel with V4L in my board?

Thanks
Regards
TMoraes


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/