Re: Re[2]: [ts-7000] Diagnosing a system lockup

["Jordi Soucheiron" <>]

I got a lockup in the ts7400 each time I tried to send a message trough a ppp connection.
I solved it moving from kernel 2.4 to 2.6

2009/1/15 Angel Rodriguez <>

Hello sean,

Yes I was running 5v because I had a few things on the PC104 bus.

AR

Wednesday, January 14, 2009, 9:09:39 PM, you wrote:

> One more thing, where you running 5V to your 7260? I have one of those
> as well
> that I'm running some parallel tests on.

>> Hello sean,

>> I had a problem somewhat like that a while back on a 7260 and it
>> turned out to be a power supply problem, my supply was just on the
>> edge of what I needed and now that then it would drop below the
>> minimum and lock up.

>> Just a thought.

>> AR

>> Wednesday, January 14, 2009, 4:20:35 PM, you wrote:

>> > Hi All,

>> > I'm testing some fairly simple C code on a TS-7350, but after about
>> 5 days
>> > of running the program my board totally locks up, no response to the
>> serial
>> > console
>> > or network pings. Can anyone recommend a way of diagnosing what is wrong
>> > when the system is in this state?
>> > I kept an eye on free RAM and free NANDFlash and neither where exhausted
>> > when the lockup occured.

>> > Thanks,
>> > Sean

>>

-- 
Jordi Soucheiron
Software Engineer

DEXMA
Parc Tecnològic la Salle
Sant Joan de la Salle, 42
08022 Barcelona
t/f: [+34] 93 280 19 18
www.dexmatech.com





__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___