Hello sean,
Yes I was running 5v because I had a few things on the PC104 bus.
AR
Wednesday, January 14, 2009, 9:09:39 PM, you wrote:
> One more thing, where you running 5V to your 7260? I have one of those
> as well
> that I'm running some parallel tests on.
>> Hello sean,
>> I had a problem somewhat like that a while back on a 7260 and it
>> turned out to be a power supply problem, my supply was just on the
>> edge of what I needed and now that then it would drop below the
>> minimum and lock up.
>> Just a thought.
>> AR
>> Wednesday, January 14, 2009, 4:20:35 PM, you wrote:
>> > Hi All,
>> > I'm testing some fairly simple C code on a TS-7350, but after about
>> 5 days
>> > of running the program my board totally locks up, no response to the
>> serial
>> > console
>> > or network pings. Can anyone recommend a way of diagnosing what is wrong
>> > when the system is in this state?
>> > I kept an eye on free RAM and free NANDFlash and neither where exhausted
>> > when the lockup occured.
>> > Thanks,
>> > Sean
>>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|