[ts-7000] hi

To:
Subject:	[ts-7000] hi
From:	"maggendran_84" <>
Date:	Mon, 12 Jan 2009 07:00:30 -0000

hi there
im newby

im using ts-7800.
i would like to what croostoolchains shoul use for this board?
and want to know whether the same tool can be used for all other
boards too?
this will help me to move forward in this field

thanks in advance



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] hi, maggendran_84 <= Re: [ts-7000] hi, Christian Gagneraud

Previous by Date:	Re: [ts-7000] Re: OP-TEMPSENSE, Jason Stahls
Next by Date:	[ts-7000] telnetd running on TS-7300, svinehunt
Previous by Thread:	[ts-7000] Telnet problem in TS-7300, K
Next by Thread:	Re: [ts-7000] hi, Christian Gagneraud
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU