[ts-7000] Re:TS7200 DIO1 Header Pin 4 Port_C0 ADC0

["Farley, Kenneth - AES" <>]

Jim:

   I’m not interested in accessing the ADC.  I am interested in accessing  Pin 4 of the DIO1 Header per the documentation of the ts-7200 manual.  The  Pin 4 of the DIO1 Header, in the default configuration, is accessed via bit 0 of Port C in the EP9302. The address location 0x8084_0008 is Port C Data Register and 0x8084_0018 is Port C Directon Register.  So the question is can I access Pin 4 of the DIO1 Header by PortC Bit0? If so, then how?

 

Thanks,
Ken F

---

This e-mail and any files transmitted with it may be proprietary and are intended solely for the use of the individual or entity to whom they are addressed. If you have received this e-mail in error please notify the sender.
Please note that any views or opinions presented in this e-mail are solely those of the author and do not necessarily represent those of ITT Corporation. The recipient should check this e-mail and any attachments for the presence of viruses. ITT accepts no liability for any damage caused by any virus transmitted by this e-mail.
__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___