Thanks a lot , I will read me through these articles!
tobi
--- In Jim Jackson <> wrote:
>
>
> Hi you need an IP networking primer.
>
> Your set up needs bridging on the ts7260, to join wlan0 to eth0
> check out this article for more info...
>
> http://www.linuxjournal.com/article/8172
>
> or just google for similar articles.
>
> An alternative would be to seperate your eth0 and wlan0 networks into
> different subnets - by setting the netmask to 255.255.255.0 on all
devices.
> Then you will have to configure appropriate default routes. You'd
probably
> need some extra routing info as well to achieve full connectivity.
>
> You might find this site useful
>
> http://www.linuxhomenetworking.com/
>
> Jim
>
> On Sun, 4 Jan 2009, wrote:
>
> > Hallo!
> >
> > I'm working since a few days on the following problem:
> >
> > I have on my TS7260 - original kernel - two networks running (all
static)
> >
> > eth0: 192.168.0.2
> > wlan0: 192.168.1.2
> >
> > netmask for both 255.255.0.0
> > gateway by default to 192.168.0.1 eth0 and wlan0
> >
> > Then I've a network camera connected to eth0 with ip 192.168.0.9,
> > netmask 255.255.0.0. Since a web/ftp/telnet/ server is running on the
> > cam, a default gateway to 192.168.0.15 is set.
> >
> > My Laptop uses the wlan0 interface and has the ip 192.168.1.100,
> > network 255.255.0.0
> >
> > Communication works fine between CAM and TS7260 and between Laptop and
> > TS7260 in either direction. But I can't ping,http,... straight from my
> > Laptop to the Camera. IP_forward is set to 1. Since this setup will
> > run completly independend and is not connected to www, I don't need
> > any firewall.
> >
> > Does anyone has a hint for me how to configure? Do I really need
> > ip_tables (which is installed in the Debian USB Stick, but all modules
> > (ip_filter,...)aren't!)? If I need IP tables, is there somewhere a
> > compiled Kernel with ip_tables (does linux-2.6.24.4-ts7200_matt-10.zip
> > has the required modules). I'm working on Leopard so, I don't know if
> > crosstools for compiling will work.
> >
> > Thanks in advance - I appreciate your time and input,
> >
> > tobias
> >
> >
> >
> >
> >
> >
> >
> >
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|