Hi Frederic,
--- In "fredolamainfroide"
<> wrote:
> I try to run 'helloworld' sample program on a TS-7370,
> I followed all instructions and when I run it, I get an "invalid
> instruction" error message.
I'm having the same 'illegal instruction' issue with the TS-7370.
Since I also have a TS-7800 by hand, I did the same test with this
board too and it worked correctly.
I don't have a clear vision of what the EABI vs OABI thing is in fact
(I'm new to ARM architecture), but I'm suspecting the helloworld
example is setup for the 7800 board which comes with an EABI kernel
(see
ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7370-linux/cross-toolchains/README.EABIvsOABI)
I still don't know if this also applies to TS-7370. Could anybody
there clarify if TS-7370 is able to run statically linked EABI code?
TIA
Andrea
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|