Thanks,
It seems to be the good way, but the filesystem is monted read-only
and changes do not stick !
Frederic
--- In "PeterElliot" <> wrote:
>
> Fredric,
>
> I'm assuming you're talking about the fastboot environment. The
> network ports are setup in the linuxrc file on the TS-7390 (and I
> assume the same on the 7370).
>
> When I boot my TS-TPC-7390 and do an 'ls' through the console the
> linuxrc file is in the base directory. Sometimes it's just a link to
> the real linucrc file, such as linuxrc-fastboot. Once it's modified
> you'll have to 'save' the changes to make them permenant.
>
> Regards,
>
> PJE
>
> --- In "fredolamainfroide"
> <fredericfiquet@> wrote:
> >
> > Hi
> > I'd like to change ip address on a TS-7370 board.
> > I found the way to do it on sd card system, it work well.
> > But I don't know how to do it on flash system.
> > I have changed address with 'ifconfig eth0 192.168.0.40 but it is
> not
> > permanent (after a reboot, address change to default 192.168.0.50 !
> >
> > How can I do ?
> >
> > frederic
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|