ts-7000
[Top] [All Lists]

[ts-7000] Re: tssdcard-7300.ko

To:
Subject: [ts-7000] Re: tssdcard-7300.ko
From: "ljkenny" <>
Date: Wed, 03 Dec 2008 14:31:08 -0000
Thank you for your reply Adriano.

Well, I did have limited support from EXT2 compiled in the kernel;
however, I just re-compiled it with full EXT2 support (i.e. every
option) and nothing's changed.

Some details:

   Device Boot      Start         End      Blocks   Id  System
/dev/sde1               1           9        2288   da  Non-FS data
/dev/sde2              10          20        2816   da  Non-FS data
/dev/sde3              30         983      244224   83  Linux

Partition one   : Kernel : RAW  (compressed zImage)
Partition two   : initrd : EXT2
Partition three : rootfs : EXT2

I'm still receiving the same output as before.

I understand that Eddie and Ronald had a hand in writing the driver. A
little help from them certainly wouldn't go a miss here. =;-)

Kind regards,
Lee

--- In  "Adriano Naspolini" <>
wrote:
>
> Kenny,
> On TPC7390 i can see:
> tssdcard: Technologic Systems SD card controller, address 0x600ff000
> tssdcard: card /dev/tssdcarda has 1935360 sectors (LUN 0)
>  tssdcarda: tssdcarda1 tssdcarda2 tssdcarda3 tssdcarda4
> 
> So, maybe some fs driver is missing to you.
> 
> You can try to use the same ts7390/7370/7350 initrd. Download it
> pre-compiled from ftp and dd to your disk.
> 
> Adriano
> 
> 
> --- In  "ljkenny" <ljkenny@> wrote:
> >
> > I'm trying to get my SD card working on the 2.6.21-ts kernel, so far
> > with limited success. 
> > 
> > I have re-compiled Busybox to allow insmod to include the 2.6 device
> > driver, but I don't know which Minor numbers were used. When I look in
> > /proc/devices, I can see the card uses Major number 254 and I've tried
> > lots of random Minor numbers, so far to no avail.
> > 
> > Also, occasionally, I receive this output:
> > 
> > $ insmod tssdcard7300.ko
> > Using tssdcard-7300.ko
> > tssdcard: Technologic Systems SD card controller, address 0x13000000
> > ssdcard: card /dev/tssdcarda has 1999872 sectors (LUN 0)
> >  tssdcarda: unknown partition table
> > 
> > Even though, when I mount or fdisk it on my development machine,
> > everything seems fine.
> > 
> > Any help would be gratefully received.
> >
>



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU