I was changing the configuration data with Redboot as i usually did
with other boards, but in one of them i can not enter into redboot
prompt. The system shows:
>> TS-NANDBOOT, Rev 1.00 - built 10:14:31, Mar 7 2005
>> Copyright (C) 2004, Technologic Systems
>> TS-BOOTROM, Rev 1.09 - built 09:54:04, Oct 23 2008
>> Copyright (C) 2006-2008, Technologic Systems
>> TS-7260: Rev >E1 CPU, Rev E PLD, 64MB SDRAM, options ( RS485 SDCARD )
>> TS-5620: detected, battery OK, time ( 09:56:12, Dec 2 2008 )
And then the system is halted.
I downloaded these files
ftp://ftp.embeddedarm.com/images/preboot/ts7260-default
ftp://ftp.embeddedarm.com/images/tsbootrom/ts7260-32-default
ftp://ftp.embeddedarm.com/images/redboot/ts7260-32-kernel
and reloaded them with serial blaster. After this, i obtain with the
command "fis list":
Name FLASH addr Mem addr Length Entry point
(reserved) 0x60000000 0x60000000 0x01D04000 0x00000000
RedBoot 0x61D04000 0x61D04000 0x00040000 0x00000000
FIS directory 0x61FFC000 0x61FFC000 0x00003000 0x00000000
RedBoot config 0x61FFF000 0x61FFF000 0x00001000 0x00000000
Then i reset the board but it is still halted at the same point.
Can someone tell me why the redboot prompt does not appear?
Thanks in advance
Javier Ramón
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|