--- In "greywolf9923" <> wrote:
>
> The problem about 64M, is only when you have for example two banks of
> 32M with two different chips select. In that case you have that
Yes, but TS does use two banks of 32M for all 64M TS ep93xx boards, so
they will have the problem. Or at least my boards do, and TS still
did last time I checked.
Does the sparsemem still have that 1G physical address expectation?
> situation. Instead, if you have only one bank of 64M (512Mbit sdram)
> attached for example with the chip select 3, then you have this
situation:
>
> 0x0000_0000 - 0x007F_FFFF
> 0x0100_0000 - 0x017F_FFFF
> 0x0200_0000 - 0x027F_FFFF
> 0x0300_0000 - 0x037F_FFFF
> 0x0400_0000 - 0x047F_FFFF
> 0x0500_0000 - 0x053F_FFFF
> 0x0600_0000 - 0x067F_FFFF
> 0x0700_0000 - 0x077F_FFFF
>
> In such case that's no problem.
>
Regards, ............ Charlie
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|