[ts-7000] How to build modules for TS7800

["lee.weihong" <>]

Hi list,

I wish to build the gspca module for my webcam using the on-board gcc
4.1 inside the TS7800 (no cross compile). However, my gspca.ko file
that came out is a OABI file, readelf -h ./gspca.ko gave flags as 0x0.

Furthur experimentation revealed that building the linux kernel
modules from the 2.6.21-ts source downloaded from TS's website all
produced OABI modules, but the modules used by the board's kernel and
supplied by TS is v4 EABI.

Can someone point me in the right direction on how to build kernel
modules? I did not modify the .config file, just ran a make
ts7800_defconfig before make modules.

Thanks


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/