[ts-7000] Re: cross compiled EABI binary gives Illegal instruction

["j.chitte" <>]

--- In  "charliem_1216" <> 
wrote:
>
> --- In  "gajans.garage" <gajamohan.m@> 
wrote:
> >
> > Hi, 
> > 
> > Thank you for your quick response. 
> > 
> > Can you please suggest me any cross-tool chains I can use with my
> > TS-7260/2.6.21-ts/debian. 
> 
> Did you pass the right -march= option when you compiled?  TS-72xx is
> ARMv4t, while TS-78xx is ARMv5t.  ARMv4t code should run on ARMv5t,
> but not the other way around.
> 
> I have used the codesourcery toolchains with good results (EABI,
> self-compiled 2.6 EABI kernel, prebuilt ARMEL rootfs)
> 
> regards, ..... Charlie

Hi Charlie,

I just grabbed thier g++ lite , built and ran the hello world on the 
host. So far. so good.

What was the prebuilt ARMEL rootfs you refer to ?

TIA.



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/