ts-7000
[Top] [All Lists]

[ts-7000] Re: COM Port Problem in PPPD

To:
Subject: [ts-7000] Re: COM Port Problem in PPPD
From: "ts7300" <>
Date: Thu, 06 Nov 2008 05:16:54 -0000
First of all Thanx for Reply.
Below are the ppp options:
-detach
xonxoff 
mru 552
mtu 552
debug
asyncmap
persist
cdtrcts
nomagic
passive
dump
10.10.20.1:10.10.20.2

I have tried with XONXOFF otions in PPP options file but still same
problem come. 
--- In  "odonovan_dan" <> wrote:
>
> Could it be an issue with flow control settings?
> ttyAM0 has all of the hardware flow control lines hooked up, whereas
> ttyAM1 doesn't so I think you would need to be using either software
> (XON/XOFF) or no flow control with that port (and configure the device
> on the other end of the connection to use the same).  RTS/CTS flow
> control would only work on ttyAM0 I think. 
> 
> 
> --- In  "ts7300" <ts7300@> wrote:
> >
> > Hi,
> >    I am using TS-7300 Board for PPPD dial up connection and PPPD
> > connection is sucessful working when I am using ttyAM0 port but once I
> > switched to other com port i.e. ttyAM1,ttyT8S0,ttyT8S1 etc I am
> > getting Problem in LCP Nego. packets.
> > ----------------------------------------
> > Using Interface ppp0
> > Connect :ppp0 <--> /dev/ttyT8S1
> > sent [LCP Config id=0X4 <mru 552> <asyncamp 0x0> <accomp>]
> > sent [LCP Config id=0X4 <mru 552> <asyncamp 0x0> <accomp>]
> > sent [LCP Config id=0X4 <mru 552> <asyncamp 0x0> <accomp>]
> > sent [LCP Config id=0X4 <mru 552> <asyncamp 0x0> <accomp>]
> > sent [LCP Config id=0X4 <mru 552> <asyncamp 0x0> <accomp>]
> > sent [LCP Config id=0X4 <mru 552> <asyncamp 0x0> <accomp>]
> > sent [LCP Config id=0X4 <mru 552> <asyncamp 0x0> <accomp>]
> > sent [LCP Config id=0X4 <mru 552> <asyncamp 0x0> <accomp>]
> > LCP:timeout sending config-requests
> > connection terminated
> > ------------------------------------------------------------
> > I am really stuck up at this problem why its not working other than
> > tyyAM0 ports.Can somebody suggets me something is their any more
> > setting is require on com ttyAM1,ttyT8S0 etc.
> > Please help me out from this.
> > 
> > Thanx.
> >
>



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU