The Linux 2.6 TS-UART drivers for the TS-BAT3 and TS-RF2 have been
updated to add support for the TS-73XX line of products. This was
accomplished by adding kernel parameters to allow the user to specify
the base address for 8-bit I/O on the PC104 bus, and mappings between
the available ISA IRQs and the corresponding ARM IRQs. Since these
differ between boards these changes should allow these boards to be used
on any TS-7XXX board now.
The files are located on the ftp site. For the TS-RF2:
ftp://ftp.embeddedARM.com/pc104-peripherals/ts-rf2/ts-72xx-linux26/
For the TS-BAT3:
ftp://ftp.embeddedARM.com/pc104-peripherals/ts-bat3/ts-72xx-linux26/
______ Best Regards,
|__ __/ Michael Schmidt
|| Software Engineer
||echnologic Systems (EmbeddedARM.com)
|| (480) 16525 East Laser Drive
|/ 837-5200 Fountain Hills, AZ 85268
http://oz.embeddedarm.com/~michael
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|