--- In Jason Stahls <> wrote:
>
> wrote:
> > I don't know what you're camera app is, but you could possibly switch
> > the LED's so they are only on when
> > the camera is actually making a picture. If this is the case, you
> > could significantly increase the power to the LED's since the duty
> > cycle is reduced.
I can't really do that... Unfortunately, the camera is run by motion,
which takes about 5 fps until motion is detected and then 12 fps.
There is no output on the camera to allow syncing the light to the camera.
>
> Along these lines you can also PWM the LEDs such that their on current
> is a couple amps. This should make them much brighter.
>
Interesting....
I've found this...
<http://www.dealextreme.com/details.dx/sku.4669>
Except for the total lack of specs, it looks promising. It's cheap
enough to try experimenting....
--Yan
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|