[ts-7000] Xorg server and Lenny

["dabetsr" <>]

Hi everyone!
           I installed lenny armel on a TS-TPC-7390 using the help and
procedure from Ted Roth (http://ted.openavr.org/Lenny-on-ts7390/). I
am currently trying to get the XServer to work, with no success. I am
running into what is apparently a display frequency issue..?

Here is the difference between the log from the Xorg in the etch
distribution that TS ships (7.1.1) vs. latest lenny package (1.4.2-7)

Original XOrg:

(II) FBDEV(0): hardware: TS7370 (video memory: 750kB)
(II) FBDEV(0): checking modes against framebuffer device...
(II) FBDEV(0):  mode "1024x768" ok
(II) FBDEV(0):  mode "800x600" ok
(II) FBDEV(0):  mode "640x480" ok
(II) FBDEV(0): checking modes against monitor...
(--) FBDEV(0): Virtual size is 800x480 (pitch 800)
(**) FBDEV(0):  Default mode "800x600": 36.0 MHz (scaled from 0.0
MHz), 35.2 kHz, 56.2 Hz
(II) FBDEV(0): Modeline "800x600"   36.00  800 824 896 1024  600 601
603 625 +hsync +vsync
(**) FBDEV(0):  Default mode "640x480": 25.2 MHz (scaled from 0.0
MHz), 31.5 kHz, 60.0 Hz
(II) FBDEV(0): Modeline "640x480"   25.20  640 656 752 800  480 490
492 525 -hsync -vsync
(==) FBDEV(0): DPI set to (75, 75)

New Xorg:

(II) FBDEV(0): hardware: TS7370 (video memory: 750kB)
(II) FBDEV(0): checking modes against framebuffer device...
(II) FBDEV(0):  mode "1024x768" test failed
(II) FBDEV(0):  mode "800x600" test failed
(II) FBDEV(0):  mode "640x480" test failed
(II) FBDEV(0): checking modes against monitor...
(--) FBDEV(0): Virtual size is 800x480 (pitch 800)
(**) FBDEV(0):  Built-in mode "current": 31.5 MHz, 31.8 kHz, 61.1 Hz
(II) FBDEV(0): Modeline "current"x0.0   31.50  800 824 864 992  480
489 492 520 -hsync -vsync -csync (31.8 kHz)
(==) FBDEV(0): DPI set to (96, 96)


Has anyone gotten a board to work with a different X server than the
original one? Does anyone know where I can get the exact source code
for the 7.1.1 version TS uses? What can I do?

All help is gladly appreciated.

Thanks,
Alberto


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/