Daniel,
Thanks I ignored the existance of ts-bootrom 1.08 ! I will install it.
bootrom-1.05 is named "tsbootrom-ts8.bin"
>> TS-BOOTROM, Rev 1.05 - built 16:48:05, Mar 1 2005
>> Copyright (C) 2005, Technologic Systems
>> TS-7200: Rev D1 CPU, Rev C PLD, 32MB SDRAM, options ( MAX197-ADC )
>> TS-5620: detected, battery OK, time ( 13:49:36, Jun 26 2006 )
>> Off-board serial at: COM3
> How do you flash via serial blaster redboot ? Could
> me post arguments that you use with serial blaster ?
The TS-7200 must be in bootstrap mode (jumper1 set)
I modified the sources to work on my early 166Mhz.
I wrote my own flash_erase and flash_program functions. With
serial_blaster I'm able to load a file in memory and then I can use
erase and program my flash.
You just need to modify boot.S to do what you want (erase one block /
program one block / jump somewhere)
If you want I can send you my patch. Beware with 200Mhz TS-7200 there
will be one line to change (PLL stuff).
The main problem if that my recompiled redboot and the one provided by
TS are different.
>> If I'm using the official TS binary: redboot-ts7200-8MBflash-update.bin
> And where you found this ? I can't found this on TS ftp site.
That's an old file date from 2005! It was on the ftp some a while. It's
precompiled redboot working fine (able to erase/program correctly).
RedBoot(tm) bootstrap and debug environment [ROMRAM]
Non-certified release, version current-TS_5 - built 15:41:04, Mar 8 2005
Regards,
Matthieu
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|