On Fri, 2008-10-10 at 18:07 +0200, Daniel Smolik wrote:
> chgans napsal(a):
> >
> > I'm as well interested to have support (in the form of i-packages)
> for
> > their other peripheral board (ts-ser4, ts-gsm1, ts-relay1, ts-adc16
> > and ts-bat3), as well of course, with support SD card. (I managed to
> > successfully build a 2.6.21-ts kernel with built-in support for
> > SD-card using their proprietary bulb (so no need for intermediate
> > ramdisk).
> >
> Could you post some info how to do it ? I have dream to get SD card
> work under kernel > 2.6.23 because I need bluetooth
> stack that work only on > 2.6.23.
I'll do it this week.
In short, that's very easy, instead of building the thing as a module
you built it as kernel code, you just need to do some quick and easy
Makefile hacking, and use the *right tool chain* along the *right SD
(bloody) bulb* binary.
Regards,
Christian
>
> Dan
>
>
>
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|