One thing I am not getting when I am Giving: PPPD -d -detach
/dev/ttyT8S0 9600 &
Where is this connect script,so that I am able to insert new command
in it or pinpoint why script is failing.
--- In "ts7300" <> wrote:
>
> Instead of Two TS7300 Board what I did is that used Linux
> Distro(DEBAIN) and one TS-7300 and same thing first using
> Software(Minicom) dial-up connection is established and from Board
> side on linux prompt type command
> pppd -d -detach /dev/ttyT8S 9600 &
> On Prompt its shows "CONNECT SCRIPT FAILED"
> Why this error is coming Because through Minicom Dial-up connection
> is establishing but When I am giving this command pppd -d -detach
> /dev/ttyT8S0 9600 & connect script fail???
>
>
> -- In "Gonzalo A. de la Vega"
> <gadelavega@> wrote:
> >
> > It seems like you don't have a physical connection. You only get
> > "sent" messages.
> >
> > On Thu, Sep 18, 2008 at 6:25 AM, ts7300 <ts7300@> wrote:
> > > Hi,
> > > I am trying to establish PPP network B/W two ts7300 Board.First
> > > using Software(Minicom) dial-up connection is establish.then quiting
> > > from minicom without reset.Afterward on linux prompt typing command
> > > ppd -d -detach /dev/tts0 9600 &
> > > ------------------------------
> > > [1] 6066
> > > asaini:/home# using channel 3
> > > Using interface ppp0
> > > Connect: ppp0 <--> /dev/ttyS0
> > > sent [LCP ConfReq id=0x1 <mru 552> <asyncmap 0x0> <magic 0x80ed3b9>
> > > <pcomp> <acc
> > > omp>]
> > > sent [LCP ConfReq id=0x1 <mru 552> <asyncmap 0x0> <magic 0x80ed3b9>
> > > <pcomp> <acc
> > > omp>]
> > > sent [LCP ConfReq id=0x1 <mru 552> <asyncmap 0x0> <magic 0x80ed3b9>
> > > <pcomp> <acc
> > > omp>]
> > > sent [LCP ConfReq id=0x1 <mru 552> <asyncmap 0x0> <magic 0x80ed3b9>
> > > <pcomp> <acc
> > > omp>]
> > > sent [LCP ConfReq id=0x1 <mru 552> <asyncmap 0x0> <magic 0x80ed3b9>
> > > <pcomp> <acc
> > > omp>]
> > > sent [LCP ConfReq id=0x1 <mru 552> <asyncmap 0x0> <magic 0x80ed3b9>
> > > <pcomp> <acc
> > > omp>]
> > > sent [LCP ConfReq id=0x1 <mru 552> <asyncmap 0x0> <magic 0x80ed3b9>
> > > <pcomp> <acc
> > > omp>]
> > > sent [LCP ConfReq id=0x1 <mru 552> <asyncmap 0x0> <magic 0x80ed3b9>
> > > <pcomp> <acc
> > > omp>]
> > > sent [LCP ConfReq id=0x1 <mru 552> <asyncmap 0x0> <magic 0x80ed3b9>
> > > <pcomp> <acc
> > > omp>]
> > > sent [LCP ConfReq id=0x1 <mru 552> <asyncmap 0x0> <magic 0x80ed3b9>
> > > <pcomp> <acc
> > > omp>]
> > > LCP: timeout sending Config-Requests
> > > -------------------------------------
> > > PPP/options:
> > >
> > > asyncmap 0
> > > crtscts
> > > lock
> > > modem
> > > mru 552
> > > netmask 255.255.0.0
> > > 10.64.253.10:10.64.253.11
> > > passive
> > > -detach
> > > mru 552
> > >
> > > Can sombody help me out in LCP Packet negotiaton why connection is
> > > failing?????
> > >
> > >
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|