ts-7000
[Top] [All Lists]

[ts-7000] ppp network

To:
Subject: [ts-7000] ppp network
From: "ts7300" <>
Date: Thu, 18 Sep 2008 09:25:12 -0000
Hi,
I am trying to establish PPP network B/W two ts7300 Board.First
using Software(Minicom) dial-up connection is establish.then quiting
from minicom without reset.Afterward on linux prompt typing command
ppd -d -detach /dev/tts0 9600 &
------------------------------
[1] 6066
asaini:/home# using channel 3
Using interface ppp0
Connect: ppp0 <--> /dev/ttyS0
sent [LCP ConfReq id=0x1 <mru 552> <asyncmap 0x0> <magic 0x80ed3b9>
<pcomp> <acc                                                         
                                                                     omp>]
sent [LCP ConfReq id=0x1 <mru 552> <asyncmap 0x0> <magic 0x80ed3b9>
<pcomp> <acc                                                         
                                                                     omp>]
sent [LCP ConfReq id=0x1 <mru 552> <asyncmap 0x0> <magic 0x80ed3b9>
<pcomp> <acc                                                         
                                                                     omp>]
sent [LCP ConfReq id=0x1 <mru 552> <asyncmap 0x0> <magic 0x80ed3b9>
<pcomp> <acc                                                         
                                                                     omp>]
sent [LCP ConfReq id=0x1 <mru 552> <asyncmap 0x0> <magic 0x80ed3b9>
<pcomp> <acc                                                         
                                                                     omp>]
sent [LCP ConfReq id=0x1 <mru 552> <asyncmap 0x0> <magic 0x80ed3b9>
<pcomp> <acc                                                         
                                                                     omp>]
sent [LCP ConfReq id=0x1 <mru 552> <asyncmap 0x0> <magic 0x80ed3b9>
<pcomp> <acc                                                         
                                                                     omp>]
sent [LCP ConfReq id=0x1 <mru 552> <asyncmap 0x0> <magic 0x80ed3b9>
<pcomp> <acc                                                         
                                                                     omp>]
sent [LCP ConfReq id=0x1 <mru 552> <asyncmap 0x0> <magic 0x80ed3b9>
<pcomp> <acc                                                         
                                                                     omp>]
sent [LCP ConfReq id=0x1 <mru 552> <asyncmap 0x0> <magic 0x80ed3b9>
<pcomp> <acc                                                         
                                                                     omp>]
LCP: timeout sending Config-Requests
-------------------------------------
PPP/options:

asyncmap 0
crtscts
lock
modem
mru 552
netmask 255.255.0.0
10.64.253.10:10.64.253.11
passive
-detach
mru 552

Can sombody help me out in LCP Packet negotiaton why connection is
failing?????





------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU