ts-7000
[Top] [All Lists]

[ts-7000] How to compile a new kernel image?

To:
Subject: [ts-7000] How to compile a new kernel image?
From: "gpimentel074" <>
Date: Thu, 04 Sep 2008 10:36:41 -0000
Hi, i'm trying to compile a new kernel image with the embedded arm
kernel source code, but without success... I have generated the zImage
and i have copy it to the sd card using dd but when i restart the
board i get from serial console the indication uncompressing linux and
a bunch of dots, after that nothing...

I have used the linux-2.6.21-ts-src-aug252008 source available on ftp
server. Does anyone recommend another version? Or does anyone have a
hoe to tutorial for compiling the kernel for a ts-7370 board or
equivalent?

Thanks for advance

Best regards, 

Gustavo Pimentel


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread] Current Thread [Next in Thread>
  • [ts-7000] How to compile a new kernel image?, gpimentel074 <=
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU