Hi,
I finally have the 2.6.24 kernel w/ patch installed and working on my
ts7260, and I want to try out the spi driver, but I'm not sure how to.
I've loaded both the spi_ep93xx.ko and spidev.ko, but udev is not
creating any /dev nodes, and using mknod (with 153, 0) doesn't work
either (the node is created, but no driver on other end).
It also appears that spidev and spi_ep93xx aren't using each other (0
'Used by' references when doing lsmod)
Finally, when loading the spi_ep93xx, I get an obscure message "Module
len 5120 truncated" Does anyone know what that means? The driver
still loads.
Any help would be most appreciated, I've never used the spi subsystem
of linux. Also, I'm not sure if I have to do something to attach the
ep93xx driver to the dev driver so I can use it from userspace.
Thanks
-Steve
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|