ts-7000
[Top] [All Lists]

[ts-7000] Re: adc module problem

To:
Subject: [ts-7000] Re: adc module problem
From: "zemog200807" <>
Date: Fri, 15 Aug 2008 05:11:11 -0000
Hello,
I was curious if you had found a resolution to the problem you noted
in this message.  I am using a TS-7250 also, but with the ts-9 kernel
(instead of the ts-11 like yours).

I have been experiencing the same "insmod: multiply defined" problem
you described below.  After reading your posting, I also experienced
an improvement in results if I ftp'ed a fresh copy of my modules t the
7250 (and like you don't understand why that would improve things).

Sorry that I am not offering advice, but rather actually repeating
your question back to you.

I came across this problem while trying to get a USB camera functional
on my 7250.  I am using the source code from 
http://qce-ga.sourceforge.net/, which has support the the (cheap)
camera that I have available.

I posted message 12208 recently when I had hit a dead end, but
unfortunately have not had any responses.  Please advise if you have
solved the problem you noted -- if I have information that might be of
use to you I will be happy to assist.

Thanks.....



--- In  "Dale" <> wrote:
>
> Hi all,
>   I am using Phil's excellent adc-0.0.2 driver on a TS-7250 with the
> ts-11 kernel. It works great when I can get the module to load. Here's
> the problem:
> 
> Insmod always works *after* I ftp the file to the TS-7250.
> 
> If the TS-7250 is rebooted, insmod always crashes with :
> insmod: multiply defined
> insmod: multiply defined
> insmod: multiply defined
> .....
> followed by a lock-up, requiring reboot.
> 
> The adc.o file is compiled from the source in the file section, and
> works fine. Insmod works without complaints only if I ftp the file
> after a reboot.  Yes, I have used sync to make sure it's not a
> cacheing problem.
> 
> Anybody got any ideas ?
> 
> Dale
> TS-7250+MAX197+64M/128M - ts11 kernel
> developing w/crosstools on Gentoo 2.6.15
>



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread] Current Thread [Next in Thread>
  • [ts-7000] Re: adc module problem, zemog200807 <=
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU